Name: Tenda AC18
Brand: Tenda
Rating: 5 (1 reviews)

To Next Page

To Previous Page

- 92 -

Modifying the LAN IP Address

If you use multiple routers or other network devices (such as switches and APs) at the same

time, IP address conflicts may occur. If the router is involved in an IP address conflict, change

the LAN IP address of the router.



Configuration

Step 1 Choose System Settings > LAN IP Settings.

Step 2 Set LAN IP Address to an IP address that is not in use, such as 192.168.5.1.

Step 3 Click Save.

---End



Verification

Verify that you can access the router web UI at 192.168.5.1 or tendawifi.com.

After the settings take effect, the system displays the login page at the new LAN IP address.

After you log in to the router web UI, the system displays the updated LAN IP address IP

address range of the router on the LAN IP Settings page. See the following figure. The LAN IP

address is changed to 192.168.5.1 and the IP address range is changed to 192.168.5.100~200.

That is, the router assigns only the IP addresses within this range to devices connected to the

router.

Questions and Answers:

Need help?

Do you have a question about the Tenda AC18 and is the answer not in the manual?

Tenda AC18 Specifications

General