Tenda AC18 - Configuring the Computer to Obtain an IP Address Automatically

- 109 -
---End
If the computer is connected to the network, Connected appears.
I.2 Configuring the Computer to Obtain an IP Address
Automatically
Perform the configuration procedure corresponding to Windows 8, Windows 7, or Windows
XP, depending on your OS. A computer installed with a wired network adapter is used as an
example to describe the procedures. The procedures for configuring computers installed with
a wireless network adapter are similar to these procedures.
I.2.1 Windows 8
Step 1 Right-click in the lower-right corner of the desktop and choose Open Network and
Sharing Center.
Step 2 Click Ethernet and then Properties.
4