- 67 -
Configuration
Step 1 Log in to the router web UI, choose VPN > PPTP/L2TP Client.
Step 2 Set PPTP/L2TP Client to the state.
Step 3 Set Client Type based on the type of service that you subscribe. In this example, set it to
PPTP.
Step 4 Set MPPE Encryption and MPPE Encryption Bits based on the service that you subscribe. In
this example, set MPPE Encryption to the state and MPPE Encryption Bits to 128.
Step 5 Set Server IP/Domain Name, User name, and Password based on the information provided
by the ISP.
Step 6 Click Connect.
---End
Remote Access
You can access the resources on the ISP's VPN server through the router.
3.8 Advanced Settings
The router provides advanced settings to address tailored requirements.
To Next Page
Loading...
