- 87 -
Step 1 Set Set-top Box to the state.
Step 2 Set Select a zone to the VLAN of your IPTV service. If the service has no VLAN ID, select No
VLAN ID. Otherwise, select Custom and enter the VLAN ID of the service. Shanghai indicates
the IPTV service VLAN in Shanghai.
Step 3 Click Save.
Step 4 Connect the STB to the 4/IPTV port of the router. The connected port functions only as an
IPTV port.
---End
You can then watch IPTV programs on a smart TV connected to your router.
Note
After configuring the router, you may need to configure your STB as well. For details, refer to the user
guide for your STB or TV.
3.8.10 Firewall
The firewall is used to protect the router against some attacks, helping ensure network
security. By default, the firewall of the router is enabled. It is recommended that you retain
the default setting.
To Next Page
Loading...
