Tenda AC18 - Channel & Bandwidth; Parameter Description

- 30 -
Step 2 Choose Internet Status and view the connection status.
If the "Bridged successfully in Universal Repeater mode." message appears, you can access the
internet through the new router.
---End
3.3.4 Channel & Bandwidth
It is recommended that you retain the default channel and bandwidth settings. Change the
settings only when necessary.
The following table describes the parameters.
Parameter
Description
Network
Mode
It specifies a protocol adopted for wireless transmission. The default
setting is recommended. For 2.4 GHz networks, the 11b/g, 11b/g/n, and
11n protocols are available. For 5 GHz networks, the 11ac and 11a/n/ac are
available.

11b/g: It indicates that clients compliant with the 802.11b or 802.11g
protocol can connect to the router.

11b/g/n: It indicates that all clients working at 2.4 GHz and compliant
with the 802.11b, 802.11g, or 802.11n protocol can connect to the
router.

11n: It indicates that clients working at 2.4 GHz and compliant with
802.11n can connect to the router.

11ac: It indicates that clients complaint with the 802.11ac protocol can