Tenda AC18 - Connecting a Computer to the Wifi Network of the Router; I Appendixes

- 107 -
I Appendixes
I.1 Connecting a Computer to the WiFi Network of the Router
A computer can connect to the WiFi network of the router only if it has a wireless network
adapter.
I.1.1 Windows 8
Step 1 Right-click in the lower-right corner of the desktop.
Step 2 Select the WiFi network of the router from the network list that appears.
Step 3 Follow the onscreen instruction to perform operation.
---End
Note

If you cannot find the icon, move the cursor to the upper-right corner of the desktop, choose
Settings > Control Panel > Network and Internet > Network and Sharing Center, click Change
adapter settings, right-click WiFi, and choose Disable. Then, right-click WiFi, and choose Enable.

If the WiFi network is not detected, check whether the Airplane mode is enabled.
I.1.2 Windows 7
Step 1 Right-click in the lower-right corner of the desktop.
Step 2 Select the WiFi network of the router from the network list that appears.
Step 3 Follow the onscreen instruction to perform operation.