Tenda AC18 - 2.2 Setting Up an Internet Connection

- 7 -
---End
2.1.2 Connecting to Your Router Using an Ethernet Cable
Perform the following procedure:
Step 1 Connect the Internet port using any of the methods shown in the following figure depending
on your internet connection means.
Step 2 Use the power adapter to connect the router to a power supply.
Step 3 Connect your computer to the 1, 2, 3, or 4/IPTV port of the router using an Ethernet cable.
After the computer is connected to the router, log in to the router web UI on the computer
and configure an internet connection. For details, refer to Setting Up an Internet Connection.
---End
2.2 Setting Up an Internet Connection
Step 1 Start a web browser, type tendawifi.com or 192.168.0.1 in the address bar, and press Enter
on the keyboard.
Step 2 Click Start.
The router detects your connection type.