- 6 -
Chapter 2 Quick Setup to Access the Internet
To access the internet, you need at least two steps:
Step 1 Connect to your router.
Step 2 Set up an internet connection.
---End
2.1 Connecting to Your Router
2.1.1 Connecting to Your Router Through WiFi
Perform the following procedure:
Step 1 Connect the Internet port using any of the methods shown in the following figure depending
on your internet connection means.
Step 2 Use the power adapter to connect the router to a power supply.
Step 3 Use a wireless device, such as a smart phone or tablet, to search for the WiFi network by the
WiFi name of the router and connect to the WiFi network. You can find the default WiFi name
and password on the label on the top of the router. For details about how to connect to the
WiFi network, refer to the appendix.
After the wireless device is connected to the router, log in to the router web UI on the wireless
device and configure an internet connection. For details, refer to Setting Up an Internet
Connection. After changing the WiFi name or password, you need to reconnect the wireless
device to the router.
To Next Page
Loading...
