Tenda AC18 - Page 40

- 35 -
If a USB storage device is connected to the router, the router displays information about the
device on the dialog box. See the following figure.
The following table describes the parameters.
Parameter
Description
Basic
parameters
sda
It specifies the space usage of a USB storage device
connected to the router.
It allows you to eject a connected USB storage device
before removing it from the router. This helps prevent
data loss.
FTP Server
It specifies the address for clients of the router to access
the USB storage device. The default address is
ftp://192.168.0.1:21. You can click this link to access the
device.
Samba Server for Windows
It specifies the address for Windows clients of the router
to access the USB storage device. The default address is
\\192.168.0.1.
Samba Server for MAC
It specifies the address for MAC clients of the router to
access the USB storage device. The default address is
smb://192.168.0.1.
Allow Internet Visits
It specifies whether to allow or disallow internet users to
access the USB storage device. By default, internet users
cannot access the device.
Access from Internet
It indicates the address for internet users to access a USB
storage device. The address is effective only after Allow
Internet Visits is enabled.