96
Access the internet through PPPoEv6
If the PPPoE account provided by your ISP includes IPv6 service, you can choose PPPoEv6 to access
the IPv6 service. The application scenario is shown as below.
Configuring procedure:
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Choose IPv6.
Step 3 Enable the IPv6 function.
Step 4 Set the connection type to PPPoEv6.
Step 5 Enter the PPPoE Username and PPPoE Password.
Step 6 Click Save.
---End
To Next Page
Loading...
