Tenda AC19

38
Parameter
Description
Upstream WiFi
Password
It specifies the WiFi password of the WiFi name that you want to bridge.
5.3.2 Extend the existing WiFi network
When there is already a router with internet access in your home, you can refer to the
configurations in this part to extend the WiFi network coverage. AC23 is used for illustration here.
Assume that your existing WiFi name and password are:
− WiFi name: Home_WiFi
− WiFi password: Tenda+245
Method 1: Set the new router to WISP mode
Configuring procedure:
If you have finished the quick setup wizard before, start a web browser and visit tendawifi.com, then
start from Step 2.
Step 1 Log in to the web UI of the router.
New router
Original router