Tenda AC19 User Manual

172
12.10.2 WAN status
In this part, you can view the information of the WAN port, including connection type, connection
status and connection duration, etc.
Parameter description
Parameter
Description
Connection Type
It specifies the internet IPv4 connection type of the WAN port.
Connection Status
It specifies internet connection status of the WAN port.
Connection Duratoin
It specifies the duration since the router is connected to the internet.
IP address
It specifies the WAN IP address of the router.
Subnet Mask
It specifies the WAN subnet mask of the router.
Default Gateway
It specifies the gateway IP address of the router.
Primary DNS
It specifies the IP address of primary and secondary DNS servers of the router.
Secondary DNS
MAC Address
It specifies the WAN MAC address of the router.
12.10.3 LAN status
In this part, you can view the LAN information such as LAN IP address, subnet mask and MAC
address.

Tenda AC19 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	- Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Security algorithms	WPA-PSK, WPA2, WPS
Product type	Tabletop router
Product color	Black
LED indicators	LAN, Power, System, USB, WPS
Antenna gain level (max)	6 dBi
Certification	CE, FCC, RoHS
Output current	2 A
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Cables included	LAN (RJ-45)
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	238.9 mm
Width	144.3 mm
Height	403 mm