Tenda AC19 User Manual

130
11.6 Filter MAC address
11.6.1 Overview
This function enables you to add devices to the whitelist or blacklist to enable or disable specified
users to access the internet through the router.
To access the configuration page, log in to the web UI of the router, and choose Advanced
Settings > Filter MAC address.
Parameter description
Parameter
Description
MAC Address Filter
Mode
It specifies the MAC address filter mode.
⚫
Blacklist: Wireless devices listed are unable to connect to the WiFi network of the
router, and wired devices listed are unable to access the internet.
⚫
Whitelist: Wireless devices listed are able to connect to the WiFi network of the
router, and wired devices listed are able to access the internet.
Blacklisted Device
It specifies the name or remark for the device.
Whitelisted Device
MAC Address
It specifies the MAC addresses of devices added to the list.
Operation
: It is used to add new devices the blacklist or whitelist.
: It is used to remove devices from the blacklist or whitelist.
Add all online devices
to the whitelist
It is only available when you set the whitelist for the first time. By clicking it, you can
add all currently connected devices to the whitelist.
11.6.2 Only allow specified device to access the internet
Scenario: The Wi-Fi in your home is misused by unknown users sometimes.
Goal: Only allow certain devices of family members to access the internet.
Solution: You can configure the MAC address filter function to reach the goal.

Tenda AC19 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	- Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Ethernet LAN (RJ-45) ports	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Security algorithms	WPA-PSK, WPA2, WPS
Product type	Tabletop router
Product color	Black
LED indicators	LAN, Power, System, USB, WPS
Antenna gain level (max)	6 dBi
Certification	CE, FCC, RoHS
Output current	2 A
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Cables included	LAN (RJ-45)
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	238.9 mm
Width	144.3 mm
Height	403 mm