116
10.2 IPv6 LAN settings
To access the page, log in to the web UI of the router and choose IPv6.
You can change the IPv6 LAN settings here.
Parameter description
It specifies two types of IPv6 LAN address assignment.
⚫
Auto: The router generates the IPv6 address according to its LAN IP address. By
default, the prefix has 64 digits.
⚫
Manual: You need to set the IPv6 LAN address manually.
It specifies two types IPv6 LAN prefix address assignment.
⚫
Auto: The router obtains an LAN prefix from the upstream device.
⚫
Manual: You need to set the IPv6 LAN prefix manually.
DHCPv6 (Dynamic Host Configuration Protocol for IPv6) is used to assign IP addresses
and prefix to IPv6 hosts on a network. It is the IPv6 equivalent of the DHCP for IPv4.
This is also known as a stateful autoconfiguration.
DHCPv6 Address
Assignment Method
It specifies the assignment type of IPv6 address information by the DHCPv6 server.
⚫
Stateless: DHCPv6 stateless configuration. Clients obtain their IPv6 address through
Router Advertisement (Stateless Address Auto Configuration) and other parameters
are allocated by the DHCPv6 server.
⚫
Stateful: DHCPv6 stateful configuration. The DHCPv6 server automatically assigns
IPv6 addresses/prefixes and other network configuration parameters (e.g. DNS
server addresses, etc.) to clients. The user needs to manually configure the start ID
and the end ID.
To Next Page
Loading...
