Tenda AC19

117
Parameter
Description
Start ID
The configuration is required when the DHCPv6 address assignment method is set to
stateful.
It specifies the range of the last segment of the IPv6 address that the DHCPv6 server
assigns to the devices. Range: 1-ffff.
End ID
IPv6 DNS
It specifies the LAN IPv6 DNS configuration method.
⚫
Auto: Obtain the IPv6 DNS address from the upstream device.
⚫
Manual: Configure the IPv6 DNS address manually.
Primary IPv6 DNS
Enter the fixed IPv6 DNS address provided by your ISP.
If your ISP only provides one DNS server address, you can leave the secondary IPv6
DNS blank.
Secondary IPv6 DNS