EasyManuals Logo

Tenda AC19 User Manual

Tenda AC19
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
160
12.6 Reboot and reset
12.6.1 Reboot the router
If any parameter fails to take effect or the router does not work properly, you can try rebooting the
router.
Rebooting the router will disconnect all connections to the router. Reboot the router during leisure
times.
To reboot the router, log in to the web UI of the router and choose System Settings > Reboot and
Reset. Click Reboot to reboot the router.
Wait for a moment until the ongoing process finishes.
12.6.2 Reset the router
If you are uncertain about why the internet is inaccessible through the router or you forget the
login password of the router, you can reset the router.
Resetting the router is not recommended unless you cannot find a solution for the current
problem anyway. You need to reconfigure the router after it is reset.
Ensure that the power supply of the router is normal when the router is reset. Otherwise the
router could be damaged.
The default login IP address is 192.168.0.1 after resetting, and no password is required.
Reset the router using the reset button
Hold down the WPS/RST button on the rear panel of the router for about 8 seconds and release
when all LED indicators blink once. The router is reset and restored to factory settings.

Table of Contents

Other manuals for Tenda AC19

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tenda AC19 and is the answer not in the manual?

Tenda AC19 Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)- Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1
Security algorithmsWPA-PSK, WPA2, WPS
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, System, USB, WPS
Antenna gain level (max)6 dBi
CertificationCE, FCC, RoHS
Output current2 A
Output voltage12 V
AC input voltage100 - 240 V
Power source typeAC
AC input frequency50 - 60 Hz
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Cables includedLAN (RJ-45)
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth238.9 mm
Width144.3 mm
Height403 mm

Related product manuals