84
It specifies the shared password of the RADIUS server.
It specifies the encryption algorithm corresponding to the selected security mode.
The available options include AES, TKIP, and TKIP&AES.
AES: It indicates the Advanced Encryption Standard.
TKIP: It indicates the Temporal Key Integrity Protocol.
TKIP&AES: It indicates that both TKIP and AES encryption algorithms are
supported. Wireless clients can connect to the WiFi network corresponding to the
selected SSID using TKIP or AES.
It specifies the automatic update interval of a WPA key for data encryption. A
shorter interval results in higher data security.
0 indicates that a WAP key is not updated.
6.1.2 Example of configuring basic settings
Setting up a non-encrypted WiFi network
Networking requirement
An office uses the device to deploy its network. It requires that the SSID is FREE and there is no WiFi
key.
Network topology
Configuration procedure
Step 1 Choose Wireless > Basic.
Step 2 Enable the wireless function.
Step 3 Change the value of the SSID text box to FREE.
Step 4 Set Security Mode to None.