Tenda AP4 - 4.4 WISP Mode Configuration

38
4.4 WISP mode
4.4.1 Overview
In WISP mode, the device connects to the hotspot provided by the internet service provider (ISP),
and offers a separate WiFi network.
Network requirement: You want to use the AP to extend the ISP hotspot to your home, and
establish a separate WiFi network for wireless clients.
Configuration procedure of setting WISP mode
Step 1 Log in to the web UI of this AP and choose Quick Setup to enter the configuration page.
Step 2 Select WISP, and click Next.
WISP mode
ISP hotspot