Tenda AP4 - 6.3 Access Control

91
6.3 Access control
6.3.1 Overview
The device allows you to set whitelist (allow to access the internet) or blacklist (disallow to access
the internet) based on wireless clients’ MAC addresses.
6.3.2 Configuring access control
Step 1 Log into the web UI of the device, and choose Wireless > Access Control.
Step 2 Select a SSID to which the rule applies.
Step 3 Enable the Access Control function.
Step 4 Select a MAC address filter mode, Disallow or Allow.
Step 5 Add the client to be controlled.
− Manual enter: Enter the MAC address of the client in the MAC Address input box, and
click Add.
− Quick add: Click Add online devices to add all connected clients to the access control
list quickly.
Step 6 Click Save.
----End
Access control list
Used to
disable/enable the
rule
Used to delete
the rule