3.2.4 PPTP
PPTP: Select PPTP (Point-to-Point-Tunneling Protocol) if your ISP
uses a PPTP connection. The PPTP allows you to connect a router
to a VPN server.
For example：
A corporate branch and headquarter can use this connection type to
implement mutual and secure access to each other’s resources.
1. Internet connection Type: Displays the current Internet
connection type.
2. PPTP Server Address: Enter the IP address of a PPTP server.
3. User Name: Enter your PPTP User Name.
4. Password: Enter the password.
5. MTU: Maximum Transmission Unit. DO NOT change it from the
factory default of 1492 unless instructed by your ISP. You may
need to change it for optimal performance with some specific
websites or application software that cannot be opened or
enabled; in this case, try 1450, 1400, etc.
6. Address Mode: Select "Dynamic" if you don’t get any IP info
from your ISP, otherwise select "Static". Consult your ISP if you
are not clear.
7. IP Address: Enter the IP address provided by your ISP. Consult
To Next Page
Loading...
