Tenda F300 User Manual

Wireless N300 Home Router
43
3.9 DHCP Client List
DHCP Client List displays information of devices that have obtained
IP addresses from the device’s DHCP Server. If you would like
some devices on your network to always get the same IP
addresses, you can manually add a static DHCP reservation entry
for each such device.
1. IP Address: Enter the IP address for static DHCP reservation.
2. MAC Address: Enter the MAC address of a computer to always
receive the same IP address (the IP you just specified).
3. Add: Click to add the entry to the MAC address reservation list.
4. OK: Click to save your settings.
Note:

Tenda F300 Specifications

General

Frequency	2.4GHz
Data Rate	300Mbps
Ports	1x 10/100Mbps WAN port, 3x 10/100Mbps LAN ports
Wireless Standards	IEEE 802.11n
Security	WPA/WPA2
Button	Reset button
Antenna	2x 5dBi fixed antennas
Weight	200g