7.3 Client Filter
This section allows you to set the times specific clients can or cannot
access the Internet via the devices’ assigned IP addresses and
service port.
Forbid Only (or Deny/Forbid): Only PCs listed as Forbidden (or
Denied) will be forbidden from accessing specified services; others
are not restricted;
Permit Only (or Permit/Allow): Only PCs listed as permitted (or
allowed) will be permitted to access specified services; others will be
forbidden.
1. Filter Mode: Select Permit Only.
2. Access Policy: Select an access policy number, say, 1, from the
To Next Page
Loading...
