Tenda F300 User Manual

Wireless N300 Home Router
79
6.4 UPNP
The Universal Plug and Play (UPnP) feature allows network devices,
such as computers from Internet, to access resources on local
host or devices as needed. UPnP-enabled devices can be
discovered automatically by the UPnP service application on the
LAN. This feature is enabled by default. No settings are required.
Enable UPnP: Check/uncheck to enable/disable the UPnP feature.
OK: Click to complete your settings.

Tenda F300 Specifications

General

Frequency	2.4GHz
Data Rate	300Mbps
Ports	1x 10/100Mbps WAN port, 3x 10/100Mbps LAN ports
Wireless Standards	IEEE 802.11n
Security	WPA/WPA2
Button	Reset button
Antenna	2x 5dBi fixed antennas
Weight	200g