7.2 MAC Filter
This section allows you to set the times specific clients can or cannot
access the Internet via the devices’ MAC Addresses.
Forbid Only (or Forbid or Deny): Specify a list of devices to
Forbid (Deny) access to Internet. All other devices not listed as
Forbidden (Denied) will be permitted.
Permit Only (or Permit or Allow): Specify a list of devices to
Permit (or Allow) access to Internet. All other devices not listed as
Permitted (or Allowed) will be forbidden.
1. Filter Mode: Select a proper filter mode, say, Forbid Only (or
Forbid/Deny).
2. Access Policy: Select an access policy number, say, 1, from
the drop-down list.
3. Policy Name: Briefly describe the current rule (It can only
consist of numbers, letters, or underscore).
4. MAC Address: Specify a MAC address for a corresponding MAC
filter rule to apply to.
5. Time: Specify a time period for a current rule to take effect. If
the field is set to 0:00-0:00, the rule will be applied 24hrs/day.
To Next Page
Loading...
Need help?
General
