6. Day(s): Select a day or several days for a current rule to take
effect. If Sun-Sat is selected, the rule will apply 7days/week.
7. Enable: Check/uncheck to enable/disable the feature.
8. OK: Click to activate your settings.
For Example:
To allow a PC at the MAC address of
00:E4:A5:44:35:69 to access Internet from Monday to Friday.
1. Filter Mode: Select Permit Only.
2. Access Policy: Select an access policy number, say, 1, from
the drop-down list.
3. Policy Name: Briefly describe the current rule, say,
Permit_only, (It can only consist of numbers, letters, or
underscore).
4. MAC Address: Enter 00:E4:A5:44:35:69.
5. Time: Select 0 for all fields to apply the rule 24hrs/day.
To Next Page
Loading...
