7. IP Address: Enter the IP address provided by your ISP. Consult
your ISP if you are not clear.
8. Subnet mask: Enter the subnet mask provided by your ISP.
9. Gateway: Enter the WAN Gateway provided by your ISP. Consult
your ISP if you are not clear.
Note:
1. PPPOE, PPTP and L2TP cannot be used simultaneously!
2. For PPTP and L2TP Internet connections, only Static IP or
Dynamic IP is available.
3. Note that PPTP and L2TP may not be available on some
products.
To Next Page
Loading...
