Tenda F300 - Page 67

Wireless N300 Home Router
63
WPS
Wi-Fi Protected Setup makes it easy for home users who know little
of wireless security to establish a home network, as well as to
add new devices to an existing network without entering long
passphrases or configuring complicated settings. Simply enter a
PIN code or press the software PBC button or hardware WPS
button (if any) and a secure wireless connection is established.
Operation Instructions:
PBC: To use WPS-PBC, try two ways below:
1) Press the hardware WPS button on the router for about 1 second
and then enable WPS/PBC on the client device within 2 minutes;
2) Press the hardware WPS button on the router for about 1 second
and then enable WPS/PBC on the client device within 2 minutes;