Terex RT200-1 - Page 128

Gear Oil Specifications
Gear Oil Type A.P.I Spec. SAE Grade Meritor
Spec.
Military/
SAE Spec.
Outside
Temp.
Non-
Extended
Drain
Lubricants
Petroleum
with EP
Additives
GL-5 85W/140 0-76-A MIL-
PRF-2105 E
and SAE
J2360
> +10°F
(-12°C)
80W/140 0-76-B > -15°F
(-26°C)
80W/90 0-76-D > -15°F
(-26°C)
75W/90 0-76-E > -40°F
(-40°C)
75W 0-76-J > -40°F
(-40°C) to
+35°F
(+2°C)
75W/140 0-76-L > -40°F
(-40°C)
Extended
Drain
Lubricants
Petroleum
with
Extended
Drain
Additives
GL-5 80W/90 --- MIL-
PRF-2105 E
and SAE
J2360
> -15°F
(-26°C)
Semi-
Synthetic
80W/90 --- > -15°F
(-26°C)
Full
Synthetic
75W/140 0-76-M > -40°F
(-40°C)
Full
Synthetic
75W/90 0-76-N > -40°F
(-40°C)
MicroGuard VGA Display
The MicroGuard VGA Display, containing a built-in heater for electronics and is rated to
-40°F (-40°C), is standard equipment. It is recommended that the operator warms up the
cab prior to turning “on” the VGA display.
127P/N 12261-319 REVISED: August 2012
Courtesy of Crane.Market