Terex RT200-1 - Specifications; Wire Rope Specifications

Wire Rope Specifications
MAIN WINCH
STD. - 5/8” 6X19 OR 6X37 IWRC
IPS PREFORMED RIGHT REG. LAY WIRE ROPE
MINIMUM BREAKING STRENGTH - 17.9 TONS
OPT. - 5/8” ROTATION RESISTANT
COMPACTED STRAND 18X19 OR 19X19
MINIMUM BREAKING STRENGTH - 22.7 TONS
AUXILIARY WINCH
STD. - 5/8” 6X19 OR 6X37 IWRC
IPS PREFORMED RIGHT REG. LAY WIRE ROPE
MINIMUM BREAKING STRENGTH - 17.9 TONS
OPT. - 5/8” ROTATION RESISTANT
COMPACTED STRAND 18X19 OR 19X19
MINIMUM BREAKING STRENGTH - 22.7 TONS
UNDER NO CONDITIONS CAN ANY OTHER SIZE, TYPE, OR LENGTH OF WIRE
ROPE BE USED ON THIS EQUIPMENT SINCE IT CONSTITUTES A SAFETY
HAZARD
Specifications
195P/N 12261-319 REVISED: August 2012
Courtesy of Crane.Market