Personal Safety
SLIP AND FALL PREVENTION
1. Always wait until machine has stopped before getting on and off equipment. Do not
jump on or off.
2. Do not use controls and steering wheel as hand holds.
3. Keep the machine clean and dry. Remove all oil, grease, mud, ice and snow from
walking surfaces.
4. Store all tools, rigging and other items in the tool box.
5. Replace all broken ladders or other access system components.
6. Keep non-slip surfaces in good condition.
7. Never jump off the machine. Instead, use the hand holds and step designed for
entering and exiting the machine. Face the machine and use three points of contact to
ensure your safety.
49P/N 12261-319 REVISED: August 2012
Courtesy of Crane.Market
To Next Page
Loading...
Need help?
General
