Workplace Safety
HANDLING PERSONNEL
Cranes can only be used to lift people when it is the least hazardous way to do the job.
(See OSHA 1926.550g, and ASME / ANSI B30.23.)
TRAINING AND KNOWLEDGE
1. Safety must always be the operator's most important concern.
2. Do not operate this crane until you have been trained in its operation. This crane must
only be operated by trained personnel, who have demonstrated their ability to do so
safely.
3. Comply with the requirements of current Occupational Safety and Health
Administration (OSHA) standards, the current American National Standards Institute
(ANSI) B30.5 latest edition.
4. Read and understand all decals and warnings.
5. Read and understand the Rating Chart.
6. Know that the crane can safely lift each load before attempting to lift.
7. The operator must understand crane signals and take signals only from designated
signal people. However, the operator must obey the stop signal from anyone.
OPERATOR'S RESPONSIBILITIES
1. Read and understand the Operator's Manual.
2. Make sure the machine is in proper order and that all operational aids and warning
signals are functional before operating.
3. Keep the machine clean, including all instrumentation, windows, lights and other
glazed surfaces.
4. Remove all oil, grease, mud, ice and snow from walking surfaces.
5. Store all tools, rigging and other necessary items in the tool box
6. Never lift a load without consulting the Rating Chart Manual located in the operator’s
cab.
7. Know the load to be lifted.
(Continued on next page ...)
Safety
32 P/N 12261-319 REVISED: August 2012
Courtesy of Crane.Market
To Next Page
Loading...
Need help?
General
