Terex RT200-1 - Inspection; Pre-Start Inspection

Pre-Start Inspection
Inspection Check List
This check list is to be used in addition to the information provided in this manual to
properly operate and maintain the machine.
Table 1:
ITEMS TO BE
INSPECTED &
CHECKED
INSPECTION
CODE
SATISFACTORY ADJUST REPAIR
VISUAL INSPECTION
H (Complete Machine)
D
OVERALL
CLEANLINESS
D
HYDRAULIC SYSTEM
(Leaks or Damage)
D
AIR SYSTEM (Leaks or
Damage)
D
HYDRAULIC FLUID D
TRANSMISSION FLUID
LEVEL
D
ENGINE CRANKCASE
FLUID LEVEL
D
FUEL TANK FLUID
LEVEL
D
RADIATOR FLUID
LEVEL
D
MACHINE
LUBRICATION
D
ATTACHMENT PIN
BOLTS
D
AXLE LOCKOUT D
LOAD MOMENT
INDICATOR (LMI)
D
H Inspect OVERALL machine (including carrier) for cracks, weld separation, leaks,
damage, vandalism.
INSPECTION CODE
INTERVALS
D - DAILY M - MONTHLY W - WEEKLY S - SEMI-
ANNUALLY
Inspection
79P/N 12261-319 REVISED: August 2012
Courtesy of Crane.Market