Safety Introduction
Owners, Users, and Operators:
Terex Cranes appreciates your choice of our machine for your application. Our number one
priority is user safety, which is best achieved by our joint efforts. We feel that you make a
major contribution to safety if you as the equipment users and operators:
1.
Comply with OSHA, Federal, State, and Local Regulations.
2. Read, Understand, and Follow the instructions in this and other manuals supplied with
this machine.
3. Use Good, Safe Work Practices in a common sense way.
4. Only have trained operators - directed by informed and knowledgeable supervision -
running the machine.
NOTE: OSHA prohibits the alteration or modification of this crane without written
manufacturer's approval. Use only factory approved parts to service or repair this unit.
If there is anything in this manual that is not clear or which you believe should be added,
please send your comments to Technical Publications Coordinator, Terex Cranes, 106 12th
Street SE, Waverly, Iowa 50677; or contact us by telephone at (319) 352-3920.
THIS SYMBOL MEANS YOUR SAFETY IS INVOLVED! READ, UNDERSTAND,
AND FOLLOW ALL DANGER, WARNING, AND CAUTION DECALS ON YOUR
MACHINE.
Many aspects of crane operation and testing are discussed in standards published by the
American National Standards Institute. These Standards are updated on an annual basis
with addendas, which are sent by ASME to the original purchasers of the standard. Terex
recommends that you purchase and refer to the following standards.
ANSI/ASME B30.5 - Mobile & Locomotive Crane (Latest Version)
These standards can be purchased from:
American Society of Mechanical Engineers
Information Central Orders/Inquiries
P.O. Box 2300
Fairfield, NJ 07007-2300
800-843-2763
Email: infocentral@asme.org
Safety
13P/N 12261-319 REVISED: August 2012
Courtesy of Crane.Market
To Next Page
Loading...
Need help?
General
