WRONG WAY
SAFETY PRECAUTIONS FOR MOUNTING OR DEMOUNTING RIMS AND WHEELS
DO’S AND DON’TS
DO DON'T
1. Follow mounting and demounting
procedures outlined in the
manufacturer’s instruction manual or
other recognized industry instruction
manual.
1. Don’t use mis-matched parts. Mis-matched
parts are dangerous. Make sure side ring and
lock ring designations match those of the base.
2. Deflate tires completely prior to
demounting by removing the valve core.
2. Do not use loads or inflation pressures
exceeding the manufacturer’s
recommendations.
3. Replace bent, cracked,worn, corroded,
or damaged parts.
3. Don’t re-inflate a tire that has been run flat or
seriously underinflated without first demounting
and inspecting the tire and rim assembly.
Maintenance
146 P/N 12261-319 REVISED: August 2012
Courtesy of Crane.Market
To Next Page
Loading...
