Terex RT200-1 User Manual

6. Fill the hydraulic reservoir to the top AFTER THE MACHINE IS PARKED IN ITS
STORAGE SPOT.
7. Coat wire rope with lubricant.
8. Coat exposed cylinder rods with grease.
The
ENGINE should be prepared as prescribed in the topic Engine Storage on page 185.
The TRANSMISSION should be prepared as prescribed in the topic Transmission Storage
on page 188.
Maintenance
184 P/N 12261-319 REVISED: August 2012
Courtesy of Crane.Market

Terex RT200-1 Specifications

General

Brand	Terex
Model	RT200-1
Category	Construction Equipment
Language	English