11
ELECTROCUTION HAZARD
Contact with electric power lines will result
in death or serious injury.
MAINTAIN REQUIRED CLEARANCE
Line Voltage Required Clearance
0 to 50KV 10 ft (3m)
50 to 200KV 15 ft (4.6m)
200 to 350KV 20 ft (6.1m)
350 to 500KV 25 ft (7.6m)
500 to 750KV 35 ft (10.7m)
750 to 1000KV 45 ft 13.7m)
>1000KV Refer to Operator's
Manual
Before operating the machine, contact the
electric power line owner to disconnect,
move or insulate power lines.
12
EXPLOSION/BURN HAZARD - will cause
death, burns or blindness due to ignition of
explosive gases or contact with corrosive
acid.
Keep all open flames and sparks away.
Wear personal protective equipment,
including face shield, gloves and long
sleeve shirt.
READ MANUALS
Read all manuals prior to operation.
DO NOT OPERATE equipment if you do not
understand the information in the manuals.
Consult your supervisor, the owner or the
manufacturer.
27P/N 12261-319 REVISED: August 2012
Courtesy of Crane.Market
To Next Page
Loading...
Need help?
General
