“Stationary” means that the crane cannot be moved when loaded to the levels shown in the
on tire load chart.
Ensure that the tires are inflated as shown in the recommended tire pressure
chart on pg. 113.
“Creep” means the crane can be moved at a maximum speed of one (1) MPH for a
distance of 200 feet and then a 30 minute waiting period is necessary to cool the tires.
Overheating will greatly reduce the life of the tires.
Never move the crane carrying a load with the boom in any position except
straight over the front.
2.5 MPH means the crane can be driven at this speed, or slower, with the tires at the
proper inflation pressure with the boom straight over the front.
127
REVISED:
To Next Page
Loading...
Need help?
General
