CHOOSING THE POINT OF LIFT
Before choosing the point of lift, check that the correct winch has been selected. Always
check the point of lift selection following selection of the winch.
• Choose the point of lift to be either from the main boom, auxiliary head, or jib by
pressing the point of lift push button (item 14). This action moves the selected lifting
point to the next available lifting point, i.e. from jib to aux head, from aux head to main
boom, and from main boom back to jib again.
- If an option is not available, it will be skipped over.
- If no other pick point options are available, the message "No other pick point
options" will be displayed on the information screen (item 1).
87REVISED:
To Next Page
Loading...
