Terramite TSS46 - Setting and Adjusting Broom

Copyright © 2007 Terramite Corporation
2.20
WWW.TERRAMITE.COM/SAFETY
Charleston, WV/USA
USA 1.800.428.3772
Intl. 1 .304.776.4231
Read Operators Manual For Safety
PARTS MANUAL
Service Operations
&
Setting and Adjusting Broom
1. Set the broom angle to that needed. (See Figures 1,
2 and 3).
2. Set broom level. (See Figure 4). Loosen the 3/4
lock nuts. (See Figure 5). Raise or lower broom
motor to obtain consistant brush contact across full
length of the broom.
3. Adjust broom contact. (See Figure 6).
FIGURE 1
Angled Right
FIGURE 2
Angled Left
FIGURE 3
Straight
TOP
VIEW
TOP
VIEW
TOP
VIEW
FIGURE 6 - Brush Setting Decal and Example of Proper Brush Setting
RIGHT WRONG
FIGURE 4
Horizontal Level
FIGURE 5
Lock Nut - Left Side (Circled)
Courtesy of Machine.Market