3.48
WWW.TERRAMITE.COM/SAFETY
Charleston, WV/USA
USA 1.800.428.3772
Intl. 1 .304.776.4231
Read Operators Manual For Safety
PARTS MANUAL
Parts
&
Copyright © 2007 Terramite Corporation
Hydraulic Oil Change and Type Specifications
When your machine is new, the hydraulic system oil and filter should be changed within the first 50
hours of use and every 250 thereafter. Refill the hydraulic reservoir with engine oil type API SF.CD
10W when outside temperature is above 40 degrees F. Use engine oil type API SF.CD 10 weight
when outside temperature is below 40 degrees F. It is important to follow these instructions to
alleviate any cold weather engine starting problems and any pressure or heat related component
failure.
DO NOT USE HYDRAULIC OIL!
MAJOR DAMAGE WILL RESULT!
For your engine oil requirements and change intervals refer to your engine owners manual.
WHETHER YOU OWN
ONE TERRAMITE OR 100,
CONTACT OUR
PARTS/SERVICE DEPARTMENT
FOR
ANY ADVICE
YOU
MAY NEED TO
TA I LO R
A STOCK LIST
TO
YOUR SPECIFIC NEEDS
600 Goff Mountain Road
P.O. Box 7146, Charleston, WV 25356-7146
1-800-428-3772
Fax 1-800-776-4845
International 1-304-776-4231
Fax 1-304-776-4845
www.terramite.com
Courtesy of Machine.Market
To Next Page
Loading...
