Max value 100:
Sets the maximum scale value of the Y axis to 100. Scanner record with
readings over 100 will be clipped.
Tapping on the More button will show more options to set the Y axis
scale.
Max value 10:
Sets the maximum scale value of the Y axis to 10. Scanner record with readings
over 10 will be clipped.
Max value 1:
Sets the maximum scale value of the Y axis to 1. Scanner record with readings
over 1 will be clipped.
Max value 0.1:
Sets the maximum scale value of the Y axis to 100. Scanner record with
readings over 0.1 will be clipped.
In the Figure 126, the function “Swap Layers” is used on the display to show the
same graph as shown in Figure 125.
Figure 126: Swap Layers
101
To Next Page