Terraplus KT-10 v2 - Measure Sequence

31
3.4.5 Measure Sequence
Step 1 Step 2 Step 3
AIR SAMPLE AIR END
Please note: MAXIMUM OF 7 SECONDS BEFORE TIMEOUT ERROR WILL BE SEEN ON SCREEN.
Measurement sample must be started
before this time has elapsed
Figure 27: Measurement Sequence
BEEP 1 BEEP 2
BEEP 1
SBP▲
AIR MEASUREMENT HAS BEEN FINISHED
POSITION THE KT-10 v2 TO YOUR SAMPLE
AND TRIGGER WITH SBP ▲
MEAS
SAMPLE
■■■■
▫▫▫▫▫▫
MEAS
AIR 1
■■
▫▫▫▫▫▫▫▫
AIR MEASUREMENT IN PROGRESS
MEAS
AIR 2
■■■■■■■
▫▫
SAMPLE MEASUREMENT HAS BEEN
COMPLETED. MOVE METER FROM
SAMPLE INTO FREE AIR AND WAIT UNTIL
THE MEASUREMENTS ARE DISPLAYED.
MEAS
45.61
AVG cnt
56.21 4