Sucs:
Enables the meter for susceptibility measurements. Along with susceptibility
results, user can obtain data average and standard deviation values in the measure
mode and data average and maximum values in the scanner mode
(Seen in Figure 10).
# of readings Average Std. Deviation Average Scanner Max
Figure 10 : (a) Measure Mode Figure 10 : (b) Scanner Mode
Cond:
Enables the meter for conductivity measurements. Along with conductivity
results, user can obtain data average and standard deviation values in the measure
mode and data average and maximum values in the scanner mode
(seen in Figure 11).
# of readings Average Std. Deviation Average Scanner Max
Figure 11 : (a) Measure Mode Figure 11 : (b) Scanner Mode
20
To Next Page