36
To store the reading, navigate to the Store option with the use of SBP▼ or SBP▲ and
select it by using LBP▼ or LBP▲ once it is highlighted.
To store the reading with a voice record, navigate to the Store with note option with the
use of SBP▼ or SBP▲ and select it by using LBP▼ or LBP▲ once it is highlighted.
Selecting Continue scan will return the display to the results page. This is accomplished
with the use of SBP▼ or SBP▲ to highlight the selection and a LBP▼ or LBP▲ to
select it.
Disable GPS will remove the GPS positions from the data set. However, the meter will
remain paired to the Bluetooth GPS. Highlight this option by moving the cursor with
SBP▼ or SBP▲ and once highlighted select it with LBP▼ or LBP▲. When you
return to the measurement menu after you Disable GPS, the menu will show Enable
GPS. Selecting Enable GPS will enable the GPS positions in the data again.
To Next Page
Loading...