Figure 84: Memory Functions
Select the read records button to have GeoView list all readings currently stored on your
KT-10 v2. Highlighting a record and pressing the delete record, will remove it from the
meters’s memory. Delete all records will format the complete memory on the KT-10 v2
and all data will be lost.
Figure 85: Memory Read
The Maintenance window has a firmware upgrade process and an additional assistance
method which can be used to assist persons in the field to correct issues that may be un-
foreseen. Session to maintainer is used for just this purpose. This will send the parameters
file from the KT-10 v2 unit to the manufacturer for further analysis and possible
77
To Next Page
Loading...