16 SoundSystem DMX
Installation in Windows 95A (OSR1).
When the SoundSystem DMX is installed, Windows 95A recognizes the card as a new
hardware component and displays the following screen.
Select "Driver from disk provided by hardware manufacturer" and click OK.
A prompt appears from a time when all drivers fit on one disk ;-) .
Enter the path <CD>:\Driver\Win9x\ and click OK.
You could also use the mouse to select the path by clicking Browse.
Windows now installs the driver for you, documenting the process with several install screens.
At this point nothing else should occur. If during this process you are prompted to do
something and you are unsure how to proceed, it is usually best to just press the Enter
key.
If Windows should ask again for a driver file, please refer once more to the above-mentioned
DMX CD directory. It could also be the case that a few other Windows features need to be
installed along with the card (e.g. if this is the first sound card installation for your system).
For this eventuality, please have your Windows CD handy.
After the driver has been successfully installed, the setup for the software installation should
begin automatically. If this is not the case, run Setup directly from the DMX CD.
<CD>:\Applications\Setup.exe
Follow the instructions on the screen. There shouldn't be any problems. You need to install
the DMX ControlPanel in order to be able to continue reading this manual. The other software
is not mandatory, but it's fun and useful.
Continue reading on page 24.
To Next Page
Loading...
Need help?
General
