54 SoundSystem DMX
The Record Window.
In the Record Window, you can determine the signal sources from an application that are to be
recorded via the DMX recorddriver. If you want to sample several devices or the DMX output,
select the "Mix" setting.
The middle of the window contains the VU meter, the level control display of the
SoundSystems. The button under the LED chain switches this on and off. This makes sense
because the display requires system resources to show the level. It is digitized in the
background with 16Bit resolution and the dynamic is analyzed. You can optimally adjust the
level to the specifications using the controller for the input sensitivity and the panorama. As
we said before, turn off the VU meter after setting it.
On the right are 5 buttons which run programs that could be needed when recording, for
example. Click one with the right mouse button and a dialog appears giving you the option of
entering the desired software path or changing the buttons name.
Right-click the button with the mouse.
To Next Page
Loading...
