HYDRAULIC PULLER TENSIONER PT2450
Manual: MI-PT2450-050-00-GB Date: 28.07.2018 Author: AT Page: 70 of 89
a.5) Repeat the procedure described above on the panel of each machine supplied, you will have the
following screen configuration;
b) MACHINE electronic connection
Once the machine number has been defined on the control panel of each machine it is necessary to
connect the machines to each other, following the procedure for a maximum of four machines:
b.1) On the panel of the machine N°1 – SLAVE, push the relative button, to connect the nearby in
machine N°2 – SLAVE
b.1)
To Next Page
Loading...
