TESTO 160 TH - External Probes

2 Description of the instrument
11
2.3 External probes
The external probes S-TH, S-LuxUV and S-Lux extend the range of functions of
the 160 THE WiFi data logger and, in conjunction with the 160 E WiFi data
logger, form an extremely versatile measurement system.
The external probes are only approved in conjunction with the
testo 160 THE and testo 160 E WiFi data loggers.
2.3.1 S-TH
The external probe S-TH can be connected to the following WiFi data
loggers: testo 160 THE and testo 160 E. You can use the S-TH probe
to carry out temperature and humidity measurements.
To make it easy to install, the probe can be pushed out of the wall
bushing. The probe can also be used without this wall bushing.
Element Element
1
Sensor
2
Screw thread
3
Securing nut
4
Jack plug