1 Safety and waste disposal
5
1 Safety and waste disposal
1.1 About this document
Use
• The instruction manual is an integral part of the instrument.
• Pay particular attention to the safety instructions and warning notices in
order to prevent injuries or damage to the product.
• Keep this documentation to hand so that you can refer to it when
necessary.
• Always use the complete original instruction manual.
• Hand this documentation on to any subsequent users of the product.
1.2 Symbols and writing standards
Display Explanation
Note: basic or further information
1.
2.
Action: several steps, the sequence must be followed.
Requirement
1.3 Safety
General safety instructions
• Only operate the product properly, for its intended purpose, and within the
parameters specified in the technical data. Do not apply any force.
• Do not operate the instrument if there are signs of damage on the housing.
• Dangers may also arise from the systems to be measured or from the
measuring environment: Always comply with the locally valid safety
regulations when carrying out measurements.
• Temperature information given on probes/sensors relates only to the
measuring range of the sensor technology. Do not expose handles and feed